무정전 전원 공급장치 & 배터리 충전장치 (UPS & B/C)
HIGH FREQUENCY RECTIFIER
LEAD ACID BATTERIES OR NICD OUTPUT VOLTAGE 24, 48, 110, 125, 220VDC AND CURRENT FROM 15A A 500A
MIR
HEAVY-DUTY MODULAR INDUSTRIAL RECTIFIER
The MIR model is the LEVER rectifier able to guarantee the maximum of in the most
demanding industrial environments with the modular
N + 1 solution
- MIR rectifier supply the loads in DC and at the same time keeps the batteries correctly charged, guaranteeing full continuity of service
- MIR uses power modules which, when suitably configured, generate high power systems and N + 1 solutions
- AC/DC modules availlable :
24Vdc – 400W
48Vdc – 4kW
110Vdc – 4,4kW
220Vdc 4,4kW - The batteries are permanently connected in parallel to the DC loads, thus making the system highly reactive to impulse loads such as motors, medium / high voltage switchgears as coils, etc.
- MIR modular technology is full Hot-swappable
SCR INDUSTRIAL RECTIFIER
OUTPUT VOLTAGE 24-48-110-125-220 VDC, OUTPUT CURRENT 30 A - 2500 A
SME
HEAVY-DUTY INDUSTRIAL DC UPS/ DC BATTERY CHARGER
Applications:
- Oil & Gas onshore and offshore
- Refineries and petrochemical plants
- Utilities & Power Generation
- Transportations
- Water desalination and treatment
- Energy stations for SCADA Remote Terminal Units
- All the industrial and process control applications
Performances, flexibility and top reliability
for critical applications
The SME model is the LEVER DC UPS/DC Charger designed to ensure the maximum power availability in the
industrial environments requiring top performances.
The core of the SME is the thyristors-based 6-pulse or 12-pulse total controlled rectifier bridge, which ensures a stable output DC voltage. The models with output current up to 250 A are completely naturally cooled.
It can be supplied in a single or redundant configuration, with changeover system designed as per Client’s Technical Specifications. Furthermore, the system is highly customizable, from the alarms to the LED
signalizations and threshold levels, and it can be enhanced by the addition of many engineering options and accessories (e.g. blocking diode, drop cells, analog measurements, special cabinet IP protection degree, etc.)
The SME DC Charger complies with the IEC 60146-1-1 and IEC 62040 Standards, including the recent IEC 62040-5-3, and it has been accordingly type-tested by CESI SpA, Italy.
Technical Features
- Output voltage: 24, 48, 110, 125, 220 Vdc
- Output current from 30 A to 2500 A
- Input voltage: 3Ph 400 – 440 – 480 Vac
- Clean and stable output DC voltage with voltage ripple <1% RMS
- Rectifier thyristor SCR-based, 6 or 12-pulse total controlled bridge
- Provided with input isolation transformer
- Natural cooling for models up to 250 A
- Three programmable levels of charge: floating, boost and commissioning charge
- Protection degree closed door up to IP54
- Equipped with a 4.3’’ HMI display, featuring an accurate overview of the system status, alarms, measurements and allowing settings adjustments
- Wide range of communication interfaces: Ethernet, Modbus, Profibus, dry contact SPDT board
- Modular floor standing cabinet 2200mm high
- Compatibility with lead acid VRLA, AGM, Gel and NiCd batteries
- Back up time: as required, from few minutes to several hours
CUSTOM INDUSTRIAL AC UPS
OUTPUT POWER 5 KVA - 200 KVA, INPUT 3PH, OUTPUT 3PH OR 1PH - DCBUS 110V-220-360 VDC
DPS
ONLINE HEAVY-DUTY INDUSTRIAL DIGITAL AC UPS SYSTEM
Applications:
- Oil & Gas onshore and offshore
- Refineries and petrochemical plants
- Utilities & Power Generation
- Transportations
- Water desalination and treatment
- All the industrial and process control applications
High flexibility and maximum industrial reliability
DPS model is the LEVER digital online AC UPS, specifically designed to power critical loads which require
high quality of AC voltage waveform and the maximum reliability in harsh environmental conditions.
Fully digital technology-based with double microprocessor control, one for the rectifier unit and one for the
inverter unit, LEVER DPS is fully custom-made, with a wide range of options to comply with Client’s Technical Specifications and can be supplied in redundant N+1 configuration.
DPS features two main operating modes: “On-Line”, where the inverter unit is in operation and supplies
power to the loads, and “Line- Interactive”, where the output voltage is supplied by the emergency mains
through the bypass to increase the efficiency of the system. The DPS is classified VFI-SS-111, it complies with the IEC 62040 Standards and it has been accordingly type-tested by CESI SpA, Italy.
Technical Features
- Output power from 5 to 200 kVA
- Input voltage: 3Ph 400 – 440 – 480 Vac
- Output voltage: 1Ph 115 – 230 Vac, 3Ph 400 – 440 – 480 Vac
- Pure sinewave output AC voltage with THDv < 1%
- Clean and stable battery DC voltage, with voltage ripple <1% RMS
- “On-Line”, “Line-interactive” (inverter unit in hot stand-by) and “Manual” operating modes
- Rectifier thyristor SCR-based, 6 or 12-pulse total controlled bridge
- Equipped with a manual switch for maintenance without disconnecting the load
- Provided with input and output isolation transformers
- Natural cooling
- Three programmable levels of charge: floating, boost and commissioning charge
- Equipped with a 4.3’’ HMI display, featuring an accurate overview of the system status, alarms, measurements and allowing system settings adjustments
- Wide range of communication interfaces: Ethernet, Modbus, dry contact SPDT board
- Modular floor standing cabinet 2200mm high
- Compatibility with lead acid VRLA, AGM, Gel and NiCd batteries
- Back up time: as required, from few minutes to several hours
CUSTOM INDUSTRIAL DC/AC INVERTER
OUTPUT 3PH OR 1PH, OUTPUT POWER 5 KVA - 200 KVA
INV
INDUSTRIAL DIGITAL DC/AC INVERTER
Applications:
- Oil & Gas onshore and offshore
- Refineries and petrochemical plants
- Utilities & Power Generation
- Transportations
- Water desalination and treatment
- All the industrial and process control applications
Industrial DC/AC inverter to supply critical loads
The LEVER INV model offers a wide range of 1Ph and 3Ph inverters with IGBT-based inverter bridge.
The system has been designed to continuously supply extra-low harmonics AC current to critical loads.
Fully digital technology-based, INV features two main operating modes: “On-Line”, where the inverter unit is
in operation and supplies power to the loads, and “Line-Interactive”, where the output voltage is supplied by the emergency mains through the bypass to increase the efficiency of the system.
Technical Features
- Output power from 5 to 200 kVA
- Input voltage: 110 Vdc, 220 Vdc
- Output voltage: 1Ph 115 Vac, 1Ph 230 Vac, 3Ph 400 Vac
- Pure sinewave output AC voltage with THDv < 1%
- IGBT-based full bridge technology inverter unit
- Static bypass switch, < 2 ms transfer time
- “On-Line”, “Line-interactive” (inverter unit in hot stand-by) and “Manual” operating modes
- Equipped with a 4.3’’ HMI display, featuring an accurate overview of the system status, alarms, measurements and allowing settings adjustments
- Wide range of communication interfaces: Ethernet, Modbus, dry contact SPDT board
- Modular floor standing cabinet 2200mm high
- Compatibility with lead acid VRLA, AGM, Gel and NiCd batteries
- Easy integration with the DC Chargers already installed
INDUSTRIAL UPS
ELECTA
10KVA-20KVA 3PH/1PH
10KVA-200KVA 3PH/3PH
- Complete range 10-200 kVA
- Small footprint
- High efficiency up to 96,5%
- Zero impact source
- Flexibility of use
- Advanced communications
The Electa series is ideal for protecting data centres and telecommunications systems, IT networks and critical systems
in general, where the risks connected with poor energy supply can compromise the continuity of activities and services.
The Electa series is available from 10-200 kVA models on-line double conversion technology in accordance with VFI-SS-111
classification (as set out in standard IEC EN 62040-3). Electa is designed and built using state-of-the-art technology and
components. It is controlled by a DSP (Digital Signal Processor) microprocessor, to provide maximum protection
to the powered loads with no impact on downstream systems, and optimised energy savings.
VEGA
10KVA-100KVA 3PH/1PH
10KVA-80KVA 3PH/3PH
- Efficiency Control System (ECS)
- Robust and reliable
- Galvanic isolation
- High overload capacity
- Extensive parallel configurations
Vega series UPS provide maximum protection and power quality for mission critical loads, including data centres, industrial
processes, telecommunications, security and electro-medical systems. Vega is an on-line double conversion UPS
(VFI SS 111 - IEC EN 62040-3) with a transformer isolated inverter. The Vega range includes three-phase input and single-phase output versions from 10 to 100 kVA, and three-phase input and output versions from 10 to 800 kVA. All versions are provided
with a 6-pulse thyristor-based rectifier, with or without optional harmonic filters. A 12-pulse thyristor-based rectifier is available on request for the 60 and 80 kVA versions with or without optional harmonic filters.
VEGA HP
100KVA-600KVA
- IGBT-based rectifier technology
- Compact and reliable
- Galvanic isolation
- High overload capacity
- LCD graphic display
The Vega HP series from 100 to 600 kVA is the LEVER UPS solution for installations requiring high energy efficiency and
maximum power availability. Vega HP Series provides maximum protection and power quality for data centres and
industrial loads. The UPS has an IGBT-based rectifier, DSP (Digital Signal Processors) technology and provides true On-line,
double conversion power protection, (VFI SS 11 - Voltage and Frequency Independent in accordance with IEC EN 62040-3).